Airconditioners Prices - Customer reviews - Frigidaire FAA065P7A 6,000 BTU MSII Air Conditioner with Electronic Controls



Frigidaire FAA065P7A 6,000 BTU MSII Air Conditioner with Electronic Controls
Larger image or other views



Manufacturer: Frigidaire

List Price:
Our Price: $139.00
You Save:
Refurbished Price:
Used Price:


Average Customer Rating: -

Product details

Offers (6)





Page:1 2 3 4 5 6 7 of 7

Spotlight customer reviews:

Name: A. D. Hill
Location:
Date: 2008-06-08
Customer Rating: -

Summary: The best a/c on the market right now. I have 2 and want another!
Comment: What I want from an air conditioner is for it to cool things off fast without making a ruckus. Before I got this I had bought and returned another brand that sounded like a souped up redneck car. It's going to be 90 degrees here today and I'm writing this from my upstairs office with this running. What's to love?

1) It gets COLD. My office is about 400 square feet and it's doing the job.

2) The fan is powerful yet not obnoxiously loud. It's not like you can't hear it, but it's not an annoying loud, either. I'm sensitive to noise and this one doesn't bother me at all. It's the sound of cool air!

3) The compressor thingy isn't loud when it kicks in.

4) ENERGY SAVER rocks! It turns the unit off when it reaches the set temp, and back on as needed. My old units would just keep blowing out air, even nasty humid air when the compressor was off. I ended up having to use a dehumidifier in conjunction with them.

5) We frequently have bad air alerts in the summer where I live, and I like that this unit has an antimicrobial mesh filter, a "clean air ionizer uses negative ion generators and electrostatic filter elements to reduce allergens in the air" and a built in dehumidifier. Sweet!

Basically, it works really well, doesn't cause new problems and will save money on power.

I have the 8,000 BTU unit in my living room. I'm using an old Sears Kenmore in my bedroom and I would love to replace it with this unit because it won't keep me awake.



Name: EliYah
Location:
Date: 2008-08-03
Customer Rating: -

Summary: Delighted (and a little amazed): 6,000 BTU FAA067P7A
Comment: THE PROBLEM
I'm in Salt Lake City, in an unshaded 10th floor apartment with an L-shaped 366 square foot living room. The short side of the L and the adjacent kitchen face west. Until yesterday I relied on a 12,000 BTU Sharp window unit ("The Beast") facing down the long side of the L, and whose compressor sounded like a down-shifting tractor-trailer, isn't energy star compliant, and has no energy-saving features. To cool the short side of the L and the kitchen I had to run one fan to blow the cool air across the room and a second to blow from there into the kitchen. Even with that plus reflective film on the west windows that area didn't really get cool in the afternoons.

INSTALLATION
After a lot of research and with some trepidation I bought this unit (the 6,000 BTU--reviews for the 8,000 BTU DON"T APPLY to this unit!!) to cool just the western part of the living area. I didn't expect it to be quiet, just quieter than the Beast, and hoped it'd save me from running the Beast earlier in the day and in the evening. I got it from a big regional furniture and housewares store for $139, $30 off the list price.

After letting the unit sit upright for 24 hours I did my usual customization of my window sills; they've got thin metal frames and are too narrow to use the accordion wings, so I need to lay a piece of wood on the bottom to keep the unit from resting directly on the window sill and support the top of the A/C with another piece of wood. Aside from that, the installation is the same as a regular wooden-framed sash window. I upgrade the stick-on foam tape, though. The first time you install one of these it'll take some fiddling to get it cushioned, positioned & adjusted, but once you get it right it'll be easier to remove and reinstall it.

RESULTS--THE BIG SURPRISE!
So, I turn the thing on. A few minutes later the air is cold, but wait a minute, where's the compressor noise? I turned it to fan-only and the sound didn't appear to change. I turned it back to cool and finally, by listening very carefully next to the window, I noticed a very slight hum added to the fan, which is the quietest A/C fan I've ever heard. It quickly cooled that corner of the apartment, and even on low the air reaches 15 feet into the kitchen, which chills nicely too. On high, there's very normal sounding but unobtrusive fan noise; on low, it's amazingly quiet. I can talk on the phone right next to it, don't have to turn the TV up, and can hardly hear it from across the room.

The fins don't do a great job of directing the air left and right, but I've yet to meet a window A/C that does better. However they do a good job of directing air upwards when you tilt the fin assemblies. The unit doesn't project air very strongly. It's enough to reach the very hot kitchen 15 feet away but not enough to circulate air well in the room on its own. My ceiling fan does that for me; a small fan directed straight at the ceiling of your bedroom will do the same for you. Because this is a desert I don't get sloshing noises, though it can feel a little humid if the compressor cycles off for a long time and the fan is running.

I'm going to get another of these to replace the Sharp unit; that'll give me a total of 12,000 BTU's for a tiny fraction of the noise. Now that I know how incredibly quiet this thing is I'll also get one for the bedroom to replace the 8,000 BTU FAA084P7A, which is way too loud.

TIPS (YOU KNOW YOU WANT THEM!)

WAIT 24 HOURS!! Noone at the store will tell you this, and I don't even think it's in the user manual, but start off by making sure the compressor lubricant is in the bottom. Otherwise you're likely to permanently damage the compressor the minute you turn it on, which means it'll be louder and less effective. If you're absolutely, positively sure that the unit was stored and transported right side up, go ahead and put it in. If not, DON'T TURN IT ON until it's been sitting right side up for at least 24 hours.

Reduce Vibration:
All window A/C units have compressors and fans, and all compressors and fans vibrate. The trick is to minimize how much vibration is transmitted from the metal A/C housing to the window and wall, both of which can vibrate like a drum.

The unit comes with stick-on strips of open-cell foam to 1) reduce vibration and 2) seal off drafts. I always upgrade this to stick-on closed-cell foam tape like M-D Building Products Sponge Rubber Tape, 3/8-by-1/2-Inch-by-10 feet, Closed Cell, Black #06619 (you can find this stuff at any hardware store). I put it at the bottom and top of the metal A/C housing and anywhere else the housing contacts the window or wall. You'll be amazed at the difference this little improvement makes.

The Right Angle:
Make sure the unit is installed at the correct angle. Use the slots in the housing that the accordion thingies fit into; they should be exactly perpendicular. The top of the housing may tilt down a little even when the angle is right, and the plastic front is rarely vertical; that's OK, they're designed to be that way. NOT doing this can make the fan and compressor louder or cause the sloshing problem people have if the thing is tilted so that water hits the fan. I've never had a problem with this in a normal wooden sash window, but if it doesn't automatically level itself, use shims at the top or bottom to even it up.



Name: Bonnie D. Pierce
Location:
Date: 2008-06-02
Customer Rating: -

Summary: Might buy a second unit
Comment: Works great. Not too noisy to sleep with it on. All the functions work as described. If I decide I need another one I would get the same one again.



Name: jammin z
Location: san diego, ca
Date: 2008-06-15
Customer Rating: -

Summary: very pleased
Comment: this is very quiet, has many great features in addition to the ones i knew about. very pleased with my purchase.



Name: R. Knell
Location: NYC
Date: 2008-07-28
Customer Rating: -

Summary: Coolin' A/C!
Comment: My previous A/C gave up the ghost! Set at the lowest temp and on high it acted as if I it was set at low 72 - better than the 100 / humid temperature outside, but not good enough for me. It also dripped water inside constantly. I research trying to find a better on; at an affordable price and found this one was rating high in Consumer Reports. Once installed and turned on, I realized how bad my previous A/C was from the beginning. It never cooled my room the way this one does. I sometimes find myself cold - and it's set to low 72! The noise is very bearable; just a white noise with a gentle noise from the motor tuning on and off. i highly recommend this. I remember reading the reviews beforehand and I think someone complained about it not working after installed. It's not a defect from the A/C - probably got damaged in transit or something (although I don't know how, as it's very well packaged) They should have just sent it back (although I KNOW that's a pain) not given it a bad review.



Page:1 2 3 4 5 6 7 of 7